PV/Photovoltaic Module/Panel Bus Bar Welding Machine for Middle Junction Box
1. Welding control: PLC is used to control the welder
2. Welding method: electromagnetic induction hot melt method
3. Heating device: The heating temperature can be adjusted from room temperature to 300℃,
4. The pressing and cooling time can be adjusted from 0.1 to 5.0/S,
5. After welding, the busbar is firm, without burrs, tin accumulation, cold solder joints, desoldering and other abnormal conditions;
6. The selection of welding heads can be kept in the formula and can be called later
7. The busbar passes through the electromagnetic heating device to position and press the busbar and the welding strip first, and then heats and melts the tin layer on the surface of the welding strip through the magnetic field. After the two are combined, they are solidified by cooling air
PV/Photovoltaic Module/Panel Bus Bar Welding Machine for Middle Junction Box
1. Welding control: PLC is used to control the welder
2. Welding method: electromagnetic induction hot melt method
3. Heating device: The heating temperature can be adjusted from room temperature to 300℃,
4. The pressing and cooling time can be adjusted from 0.1 to 5.0/S,
5. After welding, the busbar is firm, without burrs, tin accumulation, cold solder joints, desoldering and other abnormal conditions;
6. The selection of welding heads can be kept in the formula and can be called later
7. The busbar passes through the electromagnetic heating device to position and press the busbar and the welding strip first, and then heats and melts the tin layer on the surface of the welding strip through the magnetic field. After the two are combined, they are solidified by cooling air
